Welcome to the School Bus Decals Store

Products designed by those that install them. Making school bus identification easier.


Emergency Door Identification and Instructions

In stock
Product Details


Emergency Door with 2-step Instructions Red Print on White


  • Manufacturing: Red Print on White Vinyl
  • Base Material: High Performance White Vinyl
  • Backing: Pressure Sensitive Gray Adhesive
  • Properties: Flexible and Durable, Easy to apply


This decal is used on interior emergency exits of school buses. The printed decal gives instructions on opening/accessing emergency exit
Decal reads:
Emergency Door
1. Lift Handle to Unlatch
2. Push Door to Open
Decal is manufactured using High Performance Calendered Vinyl made in the U.S.A.. A Red print on White Vinyl using vinyl and inks with U/V stabilisers.

Extremely durable and high quality material with flexible properties that assist in easy application and the reduction of bubbles during application.

This Decal meets the National Highway Traffic Safety Administrations Federal Motor Vehicle Safety Standards (FMVSS) and Regulations for School Buses and Buses other than School Buses, under Standard No. 217.

Place decal within 15cm (6inches) of the release mechanism on the inside of vehicle.

Additional Details

Shelf Life: 1 Year Shelf Life in Cool and Dry Climate/Storage

Material Benefits: Good U/V, Temperature, Humidity, and Salt-Spray Resistance

Durability: 3-5 Year Applied Life

Size: 4 3/4 (h) X 4 1/2 (w) inch with approx. 3/4" letter height

Save this product for later

If decals purchased from Yellow Bus Decals should fail within 1 year from purchase date, we will replace and/or exchange the product. We may need a picture of the product to be warrantied, and a sample of the product. Examples of warrantied failures would be color fading, cracking, de-laminating.
Complete Warranty and Return policy can be found on our Warranty and Returns Page.

Apply to clean surface. It is necessary for surfaces to be free of all dirt, oil, Silicone, etc. as these can cause adhesives to fail as well as reduce the life of decals and striping.

Applications should be made when surface temperatures are above 50° F.  Applying to surfaces that are in direct sun and hot may be difficult. If possible, apply to surfaces that are in shade.
Surfaces that have been painted, need at least 72 hours for paint to completely cure and “gas-out” before applying vinyl decals or reflective striping.
Do not use liquids to apply any reflective decals or striping as this will cause damage.
For additional help on installation visit our blog, The Yellow Bus Decal Report
School bus decals shipped throughout the United States…Fast!  Our business model calls for products to be shipped to our customers A.S.A.P, in most cases within 24 hours of order being placed. We understand the importance of the order, and know that in many buses don’t pick up students without the proper identification.

More on our shipping

Pin It on Pinterest