Welcome to the School Bus Decals Store

Products designed by those that install them. Making school bus identification easier.


CNG Reflective Diamond Decal

In stock
Product Details

CNG Diamond

CNG Identification Decal NFPA 52


  • Manufacturing: Blue Print on White Reflective
  • Base Material: High Performance Reflectorized
  • Backing: Pressure Sensitive Adhesive
  • Properties: Weather Resistant NFPA 52 Compliant decal. Meets or exceeds Federal Specifications ASTM 4956


This decal is used on vehicles equipped with compressed natural gas or CNG fuel systems.

This decals primary location as designated by NFPA 52 8.2.10 is to locate decal on exterior lower right rear of vehicle. On trunk lid if so equipped, but Not on bumper.

Some States require (additional) decal to be located at, near, or on "Fill" door.

This decal is manufactured using High Performance Vinyl, and is manufactured in the U.S.A.. A Blue translucent print on Vinyl using vinyl and inks with U/V stabilisers. Extremely durable and high quality material with flexible properties that assist in easy application and the reduction of bubbles during application.

Decal size and lettering height meets NFPA 52 requirements.

Reflective material capabilities meet or Exceed Federal ASTM Specifications D 4956t requirements

Additional Details

Shelf Life: 1 Year Shelf Life in Cool and Dry Climate/Storage

Material Benefits: Good U/V, Temperature, Humidity, and Salt-Spray Resistance

Durability: 3-5 Year Applied Life

Size: 3 1/4 (h) X 4 3/4 (w) inch

Save this product for later

If decals purchased from Yellow Bus Decals should fail within 1 year from purchase date, we will replace and/or exchange the product. We may need a picture of the product to be warrantied, and a sample of the product. Examples of warrantied failures would be color fading, cracking, de-laminating.
Complete Warranty and Return policy can be found on our Warranty and Returns Page.

Apply to clean surface. It is necessary for surfaces to be free of all dirt, oil, Silicone, etc. as these can cause adhesives to fail as well as reduce the life of decals and striping.

Applications should be made when surface temperatures are above 50° F.  Applying to surfaces that are in direct sun and hot may be difficult. If possible, apply to surfaces that are in shade.
Surfaces that have been painted, need at least 72 hours for paint to completely cure and “gas-out” before applying vinyl decals or reflective striping.
Do not use liquids to apply any reflective decals or striping as this will cause damage.
For additional help on installation visit our blog, The Yellow Bus Decal Report
School bus decals shipped throughout the United States…Fast!  Our business model calls for products to be shipped to our customers A.S.A.P, in most cases within 24 hours of order being placed. We understand the importance of the order, and know that in many buses don’t pick up students without the proper identification.

More on our shipping

Pin It on Pinterest