Welcome to the School Bus Decals Store

Here is the largest selection of decals for school buses to be found on the internet.

Emergency Exit markings – Fuel Labels – School Bus Vinyl Lettering for Blue Bird, Thomas Built, IC International, Collins, and more. We even have a Custom vinyl lettering design tool that allows you to choose your vinyl color, size, and font. All of our products are manufactured with high-performance vinyl meant to last for many many years.

The products we sell are the exact same products we have installed on over 10,000 school buses throughout the U.S. – From the brutal heat of Death Valley, to the salty beaches of the Hawaiian Islands, to the sub-zero temperatures of the Sierra Nevada, our products are proven to last!  

2 Inch by 10 ft Reflective Striping- School Bus Yellow

SKU YBDREF-2X120NSBY
$26.30
Out of stock
1
Product Details

2" 3M™ Diamond Grade™ School Bus Markings – 983

Application
School buses
Brand
Diamond Grade™
Certifications and Specifications
FMVSS 217, CSA D250
Color
Yellow
Construction
Rigid
Performance Features
Retroreflective
Performance Level
Diamond Grade

Description

2 inch NSBY reflective tapes are primarily used on School Buses to outline Emergency Exits such as Emergency Exit Windows and Emergency Exit Doors.

Superior polycarbonate construction gives Series 983 the durability to feature a ten-year warranty. For enhanced safety during dawn, dusk or inclement weather conditions

Material must be applied when the air and surface temperature is 65°F (18°C) or above. Use a clean towel and Isopropyl alcohol, or similar, to wipe the surface before application. If any air bubbles are trapped, use a pin to puncture the bubble and a squeegee to push the air towards the pin hole.


Details


Impact Resistant: Continues to reflect even after impact


100% Adhesion: No grid lines to fill with water


Durability: 5 - 7+ Year appled life


Reflectivity: Provides the longest site detection distance


Save this product for later

 

If decals purchased from Yellow Bus Decals should fail within 1 year from purchase date, we will replace and/or exchange the product. We may need a picture of the product to be warrantied, and a sample of the product. Examples of warrantied failures would be color fading, cracking, de-laminating.
Complete Warranty and Return policy can be found on our Warranty and Returns Page.
 
Apply to clean surface. It is necessary for surfaces to be free of all dirt, oil, Silicone, etc. as these can cause adhesives to fail as well as reduce the life of decals and striping.
Applications should be made when surface temperatures are above 50° F.  Applying to surfaces that are in direct sun and hot may be difficult. If possible, apply to surfaces that are in shade.
Surfaces that have been painted, need at least 72 hours for paint to completely cure and “gas-out” before applying vinyl decals or reflective striping.
Do not use liquids to apply any reflective decals or striping as this will cause damage.
For additional help on installation visit our blog, The Yellow Bus Decal Report

School bus decals shipped throughout the United States…Fast!  Our business model calls for products to be shipped to our customers A.S.A.P, in most cases, the SAME DAY as order is placed. We understand the importance of your order, and know that in many cases, school buses don’t pick up students without the proper identification.

More on our shipping