Welcome to the School Bus Decals Store

Products designed by those that install them. Making school bus identification easier.


1 Inch by 10 ft Reflective Striping- School Bus Yellow

Out of stock
Product Details

1" 3M™ Diamond Grade™ School Bus Markings – 983

School buses
Diamond Grade™
Certifications and Specifications
FMVSS 217, CSA D250
Performance Features
Performance Level
Diamond Grade


1 inch NSBY reflective tapes are primarily used on School Buses to outline Emergency Exits such as Emergency Exit Windows and Emergency Exit Doors.

Superior polycarbonate construction gives Series 983 the durability to feature a ten-year warranty. For enhanced safety during dawn, dusk or inclement weather conditions

Material must be applied when the air and surface temperature is 65°F (18°C) or above. Use a clean towel and Isopropyl alcohol, or similar, to wipe the surface before application. If any air bubbles are trapped, use a pin to puncture the bubble and a squeegee to push the air towards the pin hole.


Impact Resistant: Continues to reflect even after impact

100% Adhesion: No grid lines to fill with water

Durability: 5 - 7+ Year appled life

Reflectivity: Provides the longest site detection distance

Save this product for later

If decals purchased from Yellow Bus Decals should fail within 1 year from purchase date, we will replace and/or exchange the product. We may need a picture of the product to be warrantied, and a sample of the product. Examples of warrantied failures would be color fading, cracking, de-laminating.
Complete Warranty and Return policy can be found on our Warranty and Returns Page.

Apply to clean surface. It is necessary for surfaces to be free of all dirt, oil, Silicone, etc. as these can cause adhesives to fail as well as reduce the life of decals and striping.

Applications should be made when surface temperatures are above 50° F.  Applying to surfaces that are in direct sun and hot may be difficult. If possible, apply to surfaces that are in shade.
Surfaces that have been painted, need at least 72 hours for paint to completely cure and “gas-out” before applying vinyl decals or reflective striping.
Do not use liquids to apply any reflective decals or striping as this will cause damage.
For additional help on installation visit our blog, The Yellow Bus Decal Report
School bus decals shipped throughout the United States…Fast!  Our business model calls for products to be shipped to our customers A.S.A.P, in most cases within 24 hours of order being placed. We understand the importance of the order, and know that in many buses don’t pick up students without the proper identification.

More on our shipping

Pin It on Pinterest